Walzmatic AGRO S 55

Hydraulic trolley for greenhouses
with electric drive
is designed for plant care and harvesting.
The maximum lifting height of the platform
is 5 meters, the maximum working
height is 7 meters.

Hydraulically adjustable lift of the
platform makes the work convenient and
significantly saves labor resources.
  • Platform elevation 5000 mm
  • Platform load capacity 270 kg
  • Max speed 65 m/min
  • Continuous speed control
  • High-power maintenance-free gel batteries
  • Embedded µP-based battery charger rated to IP-67
  • Non-contact sensors
  • Non-contact pedal
  • Regenerative motor braking (batteries recharged while decelerating/stopping)
  • Critical electronic components located in an IP-67 box
  • Embedded tilt angle sensor that gives an alarm sound when trolley tilts by 2.5° or more.
  • Several fool-proof levels, e. g. disabling elevation of a platform when its small wheels are extended, as well as small wheels accidental extension protection by the need to hold their control for 2 seconds
  • Battery discharge alarm sound
  • Battery level display provided on control terminal
  • Battery charger location convenience and good visibility
  • Recessed step covered with antislip tape for safe and convenient platform access
  • Trolley design is free of jutting ends and edges that eliminates risk of damaging plants during operation
  • Unsprung self-locking gate
  • Supply includes one accessory storage box easily installed and moved along trolley handrails, although boxes can be optionally added due to modular box design
  • Emergency STOP button is provided on control terminal to shut down all the systems; the trolley will break if STOP is pushed during movement
  • Outriggers are installed in this supply version to assure safe operation at 5 meters high. They can be removed if required
  • One cylinder in a scissor lift.
  • Wheels extension system is free of retraction springs. Two-way hydraulic cylinder is installed
with smooth speed control, a forward-backward
switch, an emergency stop button, the platform
direction switch and the level indicator
of the battery charge.
Audible alarm activates
when the battery
is discharged.
Microprocessor charger device
is completely hermetic,
without fan, with operation
modes indicator.
It charges the accumulator battery quickly and gently.
It is connected with built-in wire to the household
electricity network 200 W/50Hz.

The compartment is closed with a protective cover
and snapped with a magnet.
Battery level display provided
on trolley.
Microprocessor controller mounted
on the trolley deserves special
attention, as speed and direction
control as well as built-in function
that allows the trolley to move
smoothly and brake are carried out
due to the microprocessor controller.
The controller, like the entire electronic
part, is placed in a sealed compartment
of IP-67 class protection.
Simple and reliable locking mechanism
of the platform wicket
door provides easy
access and increased safety while
Independent shunting chassis
allows you to turn around the trolley
on a minimum area.
A reliable non-contact sensor
is used in the pedal.
It is carried out by means of one button. Push the wheel release button
for 2 seconds to prevent accidental triggering.

are removed
are pushed
It is not possible to push the wheels
with the platform raise
Passive safety when working on pipe rails
is a patented development of Walzmatic company!
If even during the movement with the platform lowered, the button “push the subframe”
was pressed and held within 2 seconds, the trolley brakes
and further movement will be impossible.
1. The subframe is lowered and brakes the trolley with the help of special “scotchs”
2. Small wheels on the subframe drop down between the rails, without touching them
3. The drive axle is raised 10 mm from the rails and the drive wheels rotate in the air
When the trolley is tilted by 2.5°
and more it issues a warning
sound signal
Safety is a key parameter when a trolley with a lifting mechanism works.

The Walzmatic AGRO S 55 hydraulic trolley is additionally equipped with outriggers (outboard support), which increase stability and counteract rollover during the operation of the scissor lift.

In this case, thanks to the discrete telescopic extension circuit, flexible adjustment of the support circuit is possible, and the screw pair will increase the accuracy of the supports mounting to the surface.

Reducing the preparation time for the trolley to work is achieved by extending and fixing the outriggers with non-removable spring-loaded stoppers with a pin of hardened steel.

Provides comfortable operator access
to the platform.
the box is conveniently located at the operator's fingertips,
it is installed on the handrail of the trolley.

If necessary, you can install several boxes
on the upper and lower handrails. Box
is easy to be removed and installed, it does
not have fixed fastening, which makes it
easier to work process. The kit includes 1 pcs.,
you can purchases from us additional boxes.

- made of 2mm aluminum

- powder-painted

- LxWxHmm 150 x 432 x 152

If necessary, the box is installed on the upper or lower handrails of the trolley.
The box has no fixed attachment that facilitates workflow and provides its multifunctionality.
Мade of 2-mm aluminum. You can choose one of two size options:
1) L x W x H mm 650 х 432 х 285
2) L x W x H mm 650 х 432 х 152
The button for emergency lowering of the platform
is located in an accessible location.
When you click on it, the platform
will lower in its low position, even if
the batteries are completely discharged.
The trolleys are powered with the newest “gel”
The maintenance-free battery does not require watering. This significantly saves time during the operation.
Enhanced security – there is no electrolyte fluid.
Extended lifetime. AGM technology provides a long lifetime comparatively to the batteries with electrolyte fluid.

Walzmatic AGRO S 55

Parameters Units Walzmatic AGRO S 55
Engine V / W 24 / 350
Battery V / Ah2 х 12 / 110
Recharger supply voltage V / Hz 220 / 50
Charger type Built-in automatic
Interaxial distance of rail pipes mm 500 - 800
Rail pipe diameter mm 42 - 58
Minimum dimensions in the lower position
of the platform (HхWхL)
mm 1895 х (A.S.* + 150) х 2080
Maximum dimensions in the upper position
of the platform (HxWxL)
mm 6320 x (A.S.* + 150) x 2080
Minimum platform height above pipe level mm 644
Maximum platform height above pipe level mm 3500
Maximum working height mm 7000
Speed of movement along the rails m/min 5 - 65
Dimensions of working area of platform mm 440 x 2000
Net weight kg 525
Platform carrying capacity kg270

A.S. - axle spacing
Can not find 'photogallery_flex' template with page ''