Hydraulic trolley for greenhouses
with electric drive
is designed for plant care and harvesting.
The maximum lifting height of the platform
is 3.5 meters, the maximum working
height is 5.5 meters.
Hydraulically adjustable lift of the
platform makes the work convenient and
significantly saves labor resources.
Platform elevation 3500 mm
Platform load capacity 270 kg
Max speed 65 m/min
Continuous speed control
High-power maintenance-free gel batteries
Embedded µP-based battery charger rated to IP-67
Regenerative motor braking (batteries recharged while decelerating/stopping)
Critical electronic components located in an IP-67 box
Embedded tilt angle sensor that gives an alarm sound when trolley tilts by 2.5° or more.
Several fool-proof levels, e. g. disabling elevation of a platform when its small wheels are extended, as well as small wheels accidental extension protection by the need to hold their control for 2 seconds
Battery discharge alarm sound
Battery level display provided on control terminal
Battery charger location convenience and good visibility
Recessed step covered with antislip tape for safe and convenient platform access
Trolley design is free of jutting ends and edges that eliminates risk of damaging plants during operation
Unsprung self-locking gate
Supply includes one accessory storage box easily installed and moved along trolley handrails, although boxes can be optionally added due to modular box design
Emergency STOP button is provided on control terminal to shut down all the systems; the trolley will break if STOP is pushed during movement
One cylinder in a scissor lift.
Wheels extension system is free of retraction springs. Two-way hydraulic cylinder is installed
TROLLEY CONTROL PANEL
with smooth speed control, a forward-backward
switch, an emergency stop button, the platform
direction switch and the level indicator
of the battery charge.
Audible alarm activates
when the battery
Microprocessor charger device
is completely hermetic,
without fan, with operation
It charges the accumulator battery quickly and gently.
It is connected with built-in wire to the household
electricity network 200 W/50Hz.
The compartment is closed with a protective cover
and snapped with a magnet.
Battery level display provided
Microprocessor controller mounted
on the trolley deserves special
attention, as speed and direction
control as well as built-in function
that allows the trolley to move
smoothly and brake are carried out
due to the microprocessor controller.
The controller, like the entire electronic
part, is placed in a sealed compartment
of IP-67 class protection.
Simple and reliable locking mechanism
of the platform wicket door provides easy
access and increased safety while
Independent shunting chassis
allows you to turn around the trolley
on a minimum area.
IP-67 WATERPROOFED PEDAL
A reliable non-contact sensor is used in the pedal.
MANIPULATION WITH EXTENDED WHEELS
It is carried out by means of one button. Push the wheel release button
for 2 seconds to prevent accidental triggering.
Wheels are removed
Wheels are pushed
It is not possible to push the wheels with the platform raise
Passive safety when working on pipe rails
is a patented development of Walzmatic company!
If even during the movement with the platform lowered, the button “push the subframe”
was pressed and held within 2 seconds, the trolley brakes
and further movement will be impossible.
1. The subframe is lowered and brakes the trolley with the help of special “scotchs”
2. Small wheels on the subframe drop down between the rails, without touching them
3. The drive axle is raised 10 mm from the rails and the drive wheels rotate in the air
When the trolley is tilted by 2.5°
and more it issues a warning sound signal
QUICK LIFTING OF THE PLATFORM
is carried out with use of the
PLATFORM UP/DOWN button
on the trolley control board.
ADDITIONAL OPTION - AUTOPILOT MODE
is switched on with the pushing button on the bottom of the control board.
When the pushing button is on, the trolley goes without the help of the pedal, the operator's leg is free and does not get tired. The pedal functions as a brake in this operation mode.
When the pushing button is deactivated, the movement of the trolley is again adjusted with the help of the pedal.
Provides comfortable operator access
to the platform.
MODULAR DESIGN OF BOXES
the box is conveniently located at the operator's fingertips,
it is installed on the handrail of the trolley.
If necessary, you can install several boxes
on the upper and lower handrails. Box
is easy to be removed and installed, it does
not have fixed fastening, which makes it
easier to work process. The kit includes 1 pcs.,
you can purchases from us additional boxes.
- made of 2mm aluminum
- LxWxHmm 150 x 432 x 152
ADDITIONAL OPTION - ALUMINUM BOX
If necessary, the box is installed on the upper or lower handrails of the trolley.
The box has no fixed attachment that facilitates workflow and provides its multifunctionality.
Мade of 2-mm aluminum. You can choose one of two size options:
1) L x W x H mm 650 х 432 х 285
2) L x W x H mm 650 х 432 х 152
The button for emergency lowering of the platform
is located in an accessible location.
When you click on it, the platform
will lower in its low position, even if
the batteries are completely discharged.
It is provided a special window with
a white background, on which you can
apply the trolley number or make
some notes on each trolley.
The delivery set includes
a black marker for inscriptions.
The trolleys are powered with the newest “gel”
BATTERIES MANUFACTURED UNDER
THE AGM TECHNOLOGY.
The maintenance-free battery does not require watering.
This significantly saves time during the operation.
Enhanced security – there is no electrolyte fluid.
Extended lifetime. AGM technology provides a long lifetime comparatively to the batteries with electrolyte fluid.
ADDITIONAL OPTION - HITCH
It is used to connect a self-propelled
hydraulic trolley with the AGRO BOX
series transporting trolleys
Walzmatic AGRO S5
Walzmatic AGRO S5
V / W
24 / 350
V / Ah
2 х 12 / 110
Recharger supply voltage
V / Hz
220 / 50
Interaxial distance of rail pipes
500 - 800
Rail pipe diameter
42 - 58
Minimum dimensions in the lower position of the platform (HхWхL)
1790 х (A.S.* + 150) х 2000
Maximum dimensions in the upper position of the platform (HxWxL)