Walzmatic AGRO S1

Walzmatic AGRO S1
Self-propelled rail-guided trolley
for greenhouses is specially
engineered to care for greenhouse
crops in modern greenhouses.
Designed for everyday operations not
requiring hydraulic rail pipe trolleys.
No need to always change the height
of the platform, when working in greenhouses.
Most caring works, as well as other
operations, are performed at a fixed height.

The maximum lifting height of the platform
is 2.6 m; the maximum working height is 4.6 m.
Thanks to a clever, functional and simple
design without hydraulic systems,
the probability of technical malfunctions
occurrence tends to zero.


Walzmatic ARGO S1
EASILY MOVES
ALONG THE ROWS,

using heating pipes as rails.
Every employee will be able to easily perform
any work at different levels relative
to the ground (the platform height
is adjustable in increments of 150 mm).
1 (1).jpg
ADDITIONAL OPTION
FOR HARVESTING
A stand for boxes easily installable
and adjustable in increments of 150 mm.
Load capacity up to 50 kg.
Several stands can be mounted
on the trolley.

The stand is easily mounted
on the trolley stands without
extra tools. Securely fixed
with two spring-loaded
fixing pins.
MOTION CONTROLLER
Special attention should be paid to the microprocessor-based
controller, installed on the trolley. It controls
the speed and the movement direction; a built-in
function allows also the trolley to start
and brake smoothly. The controller, as well
as the entire electronic part, is placed
in a leak-proof compartment with
protection rating IP-67.
TROLLEY OPERATION PANEL
A handy, nice and ergonomic design,
with a smooth speed adjustment,
back-and-forth switch, an emergency
stop button and an indicator
of the battery charge level.
Audible alarm activates
when the battery
is discharged.
block_3_1_2.png
BUILT-IN INDUSTRIAL MICROPROCESSING
RECHARGER WITH CHARGE LEVEL INDICATOR

quickly and carefully charges the battery; turned on by a built-in wire
with a 220-volt plug for standard jack.
THANKS TO FOUR
ADDITIONAL SPINNING
WHEELS, THE TROLLEY
TURNS AROUND
This provides easy
and uncrossed manoeuvring
in a confined area.
IP-67 WATERPROOFED
PEDAL
A reliable non-contact sensor
is used in the pedal.
BOX MODULAR STRUCTURE
The box is conveniently located at operator’s hand;
it is mounted on the trolley handrails.

If necessary, several boxes can be mounted
on the upper and lower handrails. The box
is easy to remove and mount; it does
not have any fixed mount structure
that makes the working process easy.
Specifications:

- made of 3mm aluminium

- coated with powder paint

- L x W x H mm 492 x 150 x 153

The trolleys are powered with the newest “gel”
BATTERIES MANUFACTURED UNDER
THE AGM TECHNOLOGY.
The maintenance-free battery does not require watering. This significantly saves time during the operation.
Enhanced security – there is no electrolyte fluid.
Extended lifetime. AGM technology provides a long lifetime comparatively to the batteries with electrolyte fluid.
TECHNICAL SPECIFICATION:

Parameters Units Walzmatic AGRO S1
Motor set V / W 24 / 250
Battery V / Ah 2x12 / 80
Recharger supply voltage V / Hz 220 / 50
Recharger typeBuilt-in automatic
Interaxial distance of rail pipes mm 450 - 860
Rail pipe diameter mm 42-58
Minimum dimensions assembled (HxWxL) mm 2690x835x1790
Maximum dimensions assembled (HxWxL) mm 3860x835x1790
Minimum lifting height of the platform above the pipe level m 0.36
Maximum lifting height of the platform above the pipe level m 2.6
Maximum operating height m 4,6
The platform height adjustment increment mm 150
The trolley rail travel speed m/min 4-40
Speed adjustment smooth
The platform operating space dimensions mm 1207x496
Net weight assembled kg 185
Load capacity kg 150


PLATFORM TROLLEY
Walzmatic AGRO S1 IS REALLY THE BEST
PRODUCT IN THE SEGMENT


additional
stair-steps

are conveniently located
on the trolley chassis
the original design
of the platform
allows for quick
height adjustment
without any extra
tools
simple and reliable
interlocking mechanism
of the platform gate

provides easy access
and enhanced security
during operation